产品升级小体验 Product upgrade experience

青岛奥得森电子有限公司，DEG-系列电子水平仪于二零二一年底升级改型完毕，改变提升四项功能，为使用者带来更便捷高效的全新体验。

1，采用ABS工程塑料，外观造型圆润中透着硬朗，富有质感。

2，液晶屏改为170°超宽可视角、增加背光，使读数更清晰，大大提高观测效率。

3，更改为大电量、通用度更好的高性能电池，不仅使待机时间大幅度增加、节省了人力物力而且更为环保。

4，电池仓盖重新设计制作，改为手动旋钮，更换电池不再需要借助任何工具。

产品升级是痛苦与狂喜的过程，电子产品也不例外。尤其是精密仪器的电子产品，既要内核保持一如既往的，保持原来的内部结构，
又要提升外观的质感，还要以客户需求为出发点改善、增加各种提高客户使用体验的功能，这样就给新一代产品增加了挑战和难度。

简单说，仪器是有两部分组成，内核和外观。比如汽车的内核是发动机变速箱等，外观则是车型，仪器也是一样，由这两部分组成，两者缺一
不可。

仪器部分内核小改进，更新外形属于比较简单的事，但实际操作起来却是牵一发而动全身：譬如，液晶屏加背光灯，背光灯会消耗仪器电池的待机
时间，就牵扯到电池容量需要加大，加大电池容量就必须加大电池体积，电池体积加大就要向仪器内部要空间，这就是一连串的改动。

加大电池仓，就要向外壳要空间，向外壳要空间就牵扯ABS工程塑料的模具、注塑等，液晶屏加背光灯需要与液晶屏加工厂家交流。

工作就是这样，构思方案、设计图纸、追求精致的边角棱细节。当把这堆实物“剪不断理还乱的物什”摊在桌面上，貌似一团乱麻，一根根理顺、
一点点纠正、一丢丢加减……理顺这堆“乱麻”过程是痛苦的，然而，当那个“它”忽而出现在灯火阑珊处，那满足与狂喜非你莫属。

Qingdao Aodesen Electronics Co., Ltd. completed the upgrade and modification of the DEG series electronic level at the end of 2021, which includes four functions and provides users with a more convenient and efficient new experience.

1. Made of ABS engineering plastic, the appearance is round yet tough, with a rich texture.
2. The LCD screen has been changed to a 170 ° ultra wide viewing angle and backlight has been added to make the readings clearer, greatly improving observation efficiency.
3. Changing to a high-performance battery with high battery capacity and better versatility not only significantly increases standby time and saves manpower and resources, but also makes it more environmentally friendly.
4. The battery compartment cover has been redesigned and manufactured with a manual knob, eliminating the need for any tools to replace the battery.

Product upgrades are a painful and ecstatic process, and electronic products are no exception. Especially for electronic products of precision instruments, the core should remain the same as before, maintaining the original internal structure,

It is necessary to enhance the texture of the appearance and improve and add various functions that improve the customer experience based on customer needs, which adds challenges and difficulties to the new generation of products.

Simply put, an instrument consists of two parts: the core and the exterior. For example, the core of a car is the engine, gearbox, etc., while the exterior is the model, and the instruments are the same, consisting of these two parts, with one missing

must not.

Minor improvements to the core of the instrument and updates to its appearance are relatively simple, but in actual operation, they can have a ripple effect: for example, adding a backlight to the LCD screen can consume the standby battery of the instrument

Time is related to the need to increase battery capacity. To increase battery capacity, it is necessary to increase the battery volume, which in turn requires space inside the instrument. This is a series of modifications.

To increase the battery compartment, you need space for the outer shell, which involves ABS engineering plastic molds, injection molding, etc. Adding backlight to the LCD screen requires communication with the LCD screen processing manufacturer.

That's how work is, conceptualizing plans, designing blueprints, and pursuing exquisite corner details. When this pile of physical objects is scattered on the table, it seems like a mess, sorted out one by one

Correcting little by little, adding and subtracting little by little... the process of sorting out this mess is painful, but when that "it" suddenly appears in the dim light, the satisfaction and ecstasy are none other than yours.