Product upgrade experience
青岛奥得森电子有限公司，DEG-系列电子水平仪于二零二一年底升级改型完毕，改变提升四项功能，为使用者带来更便捷高效的全新体验。
Qingdao Aodesen Electronics Co., Ltd. completed the upgrade and modification of the DEG series electronic level at the end of 2021, which includes four functions and provides users with a more convenient and efficient new experience.

电子式水平仪，它用来测量高精度的工具机，如NC车床、铣床、切削加工机、三次元量床等床面，其灵敏度非常高。下面就详细为您介绍电子水平仪的定义、原理及应用。
Electronic level, which is used to measure high-precision machine tools such as NC lathes, milling machines, cutting machines, three-dimensional measuring beds, etc., has very high sensitivity.

将被检测到的电子水平仪放在已经调整到大致水平位置的平板(或机床导轨)上，靠近定位块。气泡稳定后，气泡末端的读数为a1，然后按水平方向调整180。°，准确放在原来的位置，根据次阅读的一侧，记下气泡另一端的阅读量为a2，两次阅读量差的一半为零位偏差=(a1-a2)/2格。如果零位偏差已经超过许可范围，则需要高速零位机构。另一种方法是找到相对零位点，而不是调整零位。
Place the detected electronic level on a flat plate (or machine guide rail) that has been adjusted to a roughly horizontal position, close to the positioning block. After the bubble stabilizes, the reading at the end of the bubble is a1, and then adjust 180 horizontally. Accurately place it in its original position, and based on the side of the second reading, record the reading volume of the other end of the bubble as a2. Half of the difference between the two readings is the zero position deviation=(a1-a2)/2 grid. If the zero position deviation has exceeded the allowable range, a high-speed zero position mechanism is required. Another method is to find the relative zero point, rather than adjusting the zero point.

工作原泡水平仪的玻璃管内壁是一个具有一定曲率半径的曲面。当电子水平仪倾斜时，气泡会移动到电子水平仪上升的一端。水平气泡内壁曲率半径越大，分辨率越高，曲率半径越小，分辨率越低。因此，水平气泡的曲率半径决定了产品的精度。
The inner wall of the glass tube of the working bubble level is a curved surface with a certain radius of curvature. When the electronic level is tilted, the bubble will move to the rising end of the electronic level.

用指针指示装置指示测量值的仪器称为指针式电子水平仪，用数显指示装置指示测量值的仪器称为数显式电子水平仪。
The instrument that uses a pointer indicating device to indicate the measured value is called a pointer electronic level, and the instrument that uses a digital indicating device to indicate the measured value is called a digital electronic level.